Abstract
In this study, the suitability of walnut/almond shells as renewable underutilized agricultural wastes for wood based panel manufacturing was investigated. Particleboards containing different walnut/almond shells particle ratios (0%, 10%, 20%, 30% and 100%) were made using urea–formaldehyde (UF) resin. Some mechanical (modulus of elasticity, modulus of rupture and internal bond strength), physical (thickness swelling and water absorption) properties and formaldehyde emission of the particleboards were evaluated. The addition of walnut/almond particle significantly improved water resistance of the panels and greatly reduced their formaldehyde emissions. However, flexural properties and internal bond strength decreased with increasing walnut/almond shells content in the panels. The walnut/almond shells can be considered as an alternative raw material or filler in the manufacture of wood based particleboards used in indoor environment due to lower thickness swelling, water absorption and formaldehyde emission. Besides, using these underutilized materials in forest industry could decrease the pressure on forest resources and some job opportunities can be created.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.