Effect of used-foundry sand on the mechanical properties of concrete

Abstract

Used-foundry sand is a by-product of ferrous and nonferrous metal casting industries. Foundries successfully recycle and reuse the sand many times in a foundry. When the sand can no longer be reused in the foundry, it is removed from the foundry and is termed used/spent foundry sand. In an effort to utilize used-foundry sand in large volumes, research is being carried out for its possible large-scale utilization in making concrete as partial replacement of fine aggregate. This paper presents the results of an experimental investigation carried out to evaluate the mechanical properties of concrete mixtures in which fine aggregate (regular sand) was partially replaced with used-foundry sand (UFS). Fine aggregate was replaced with three percentages (10%, 20%, and 30%) of UFS by weight. Tests were performed for the properties of fresh concrete. Compressive strength, splitting-tensile strength, flexural strength, and modulus of elasticity were determined at 28, 56, 91, and 365 days. Test results indicated a marginal increase in the strength properties of plain concrete by the inclusion of UFS as partial replacement of fine aggregate (sand) and that can be effectively used in making good quality concrete and construction materials.