Abstract
Abstract To study the effect of uniaxial compression on coal nanostructure during uniaxial compression, in situ synchrotron radiation small angle X-ray scattering experiments were carried out on four coals with different ranks under uniaxial compression. According to the scattering data during the uniaxial compression process, the fractal characteristics and the variation feature of fractal dimension with stress were obtained. Four coals with different ranks all possess two fractal characteristics: pore fractal occur in the smaller pore range (7–17 nm) in the high q value range, and surface fractal occur in the larger pore range (17–52 nm) in the low q value range. For two low rank coals, with increasing stress, the pore fractal dimension DP decreased and the surface fractal dimension DS increased, respectively; the variation trends of DP and DS were obvious. This indicates that with increasing stress, the heterogeneity and complexity of the pores decrease, the surface roughness of the pores increases, and stress has a significant effect on the nanopore structure. The smaller pores are more susceptible to stress, and the influence range of stress on low rank coals is larger than that on high rank coals. The change rate of fractal dimension (RD) has a poor relationship with compressibility during uniaxial loading and is related to coal rank. The RD per unit stress for high rank coals is larger than that for low rank coals. Nanostructure response to uniaxial compressive stress is more significant in low rank coals than in high rank coals. Compared with low rank coals, high rank coals have strong aromatization and molecular structure, and the nanostructures are less susceptible to failure under uniaxial stress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.