Year-end Sale % OFF 
Abstract
Highly purified industrial bisphenol and cycloaliphatic epoxy oligomers of ED-24 and UP-612 brands were used to produce optically transparent products. UV radiation of a low-pressure mercury lamp with 80% of the light energy at 254 nm was used to study photodegradation. X-ray apparatus with 0.7BSV- Ag tube was used as an ionizing radiation source to investigate the effect of X-rays on the spectra of organic dyes in epoxy polymer. The threshold value of the energy generated by ruby laser which indicated the degradation in the test samples recorded by light scattering method was determined to study radiation resistance of epoxy polymers. Basically, all the dyes exhibited high resistance to UV light. The observation of the absorption spectra showed that on average, a third of the dye molecules in the matrix experienced photobleaching within 200 hour exposure. The exception was coumarin 1, which was completely decolourized after 40 hours of exposure. X-ray irradiation of the samples for two hours results in the change in the optical density equivalent to that caused by 40 hour exposure to UV irradiation. However, in the first case, the matrix optical density is proportional to the irradiation time, and in the second case, it remains stable upon further UV irradiation. The comparison of photoaging processes in dyed and undyed epoxy polymers showed that the investigated organic dyes do not have a sensitizing effect on the matrix. The stability of the optical properties of the epoxy matrices exposed to the effects of different factors was found to depend on the nature of epoxy polymer and the technique of its production. The results of these effects are significantly different in the character of the change in the optical density and mechanisms of chemical transformations in polymer.
Highlights
One of the promising areas for application of transparent polymeric materials is laser technology, where these materials can be used to make active elements with lasing dyes, bleaching filters for Q-switching, and others
This paper presents the results obtained from the experimental study of photo- and X-ray degradation of dyed epoxy polymers
The observation of the absorption spectra showed that around a third of the dye molecules in the matrix were photobleached during 200 hour exposure
Summary
One of the promising areas for application of transparent polymeric materials is laser technology, where these materials can be used to make active elements with lasing dyes, bleaching filters for Q-switching, and others. A dye laser with a dye-doped solid matrix combines the advantages of solid-state lasers, which can generate radiation in a wide spectrum range completely overlapping the entire visible spectrum [1,2,3]. Practical use of laser elements largely depends on their ability to provide the operational life and to efficiently convert pump radiation of different power levels. These parameters depend on both the solid medium and the dye incorporated [4,5,6].
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
