Abstract
Ti and its alloys have received wide attention in marine engineering. However, the limited anti-biofouling capability may hinder their wide application. In the present work, micro-arc oxidation (MAO) with and without the introduction of ultrasonic vibration (UV) has been conducted on metallic Ti substrate in an aqueous solution containing Na2Cu-EDTA to produce a Cu-modified TiO2 coating. Microstructural characterization reveals that the introduction of UV increased the thickness of the coating (ranging from ~13.5 μm to ~26.2 μm) compared to the coating (ranging from ~8.1 μm to ~12.8 μm) without UV. A relatively higher Cu content (~2.13 wt.%) of the coating with UV relative to the coating (~1.39 wt.%) without UV indicates that UV enhances the incorporation of Cu into TiO2. Further, both electrochemical properties and the response to sulfate-reducing bacteria (SRB) were evaluated, revealing that UV introduction endows Cu-modified TiO2 coating with enhanced corrosion resistance and antifouling capability. The present results suggest that ultrasound-auxiliary micro-arc oxidation (UMAO) obviously enhances the surface performance of Ti alloys for promising applications in marine engineering.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
