Abstract
Some issues such as clustering of TiB 2 particles, formation of long rod-like Al 3Ti particles, as well as high porosity level usually associate with the fabrication of in situ TiB 2p/Al-alloy composites via conventional stir casting technique using Ti and B as reactants. High-intensity ultrasonic vibration was introduced in our research to solve the above issues. The process involved that the original in situ TiB 2p/Al–12Si–4Cu sample with large clusters of TiB 2 particles, large long rod-like Al 3Ti particles and high porosity was remelted at 850 °C, and then ultrasonic vibration was applied to the melt with an ultrasonic probe. The microstructural evolution of the samples treated by ultrasonic vibration with different time was examined by using SEM. After treated by ultrasonic vibration for 12 min, large clusters of TiB 2 particles were broken up effectively and TiB 2 particles were dispersed uniformly in the matrix, and long rod-like Al 3Ti particles were turned into blocky ones with the size of 10 μm due to the effect of ultrasonic stirring. In the meantime, the porosity in the composites decreased from about 6.5% to 0.86% due to the effect of ultrasonic degassing. Microhardness test suggested that a homogeneous microstructure of the composite was achieved after ultrasonic treatment. An effective approach using high-intensity ultrasonic vibration to optimize the microstructures of the particulate reinforced Al-alloy composites was proposed, and the mechanism of the effect of high-intensity ultrasonic vibration on the microstructural evolution of the reinforcements and degassing of composites was also discussed in our research.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.