Abstract

Given the susceptibility to weld porosity and poor weld formability in laser beam welding (LBW), this study delves into an examination of the impact of ultrasonic vibrations on microstructural morphologies and mechanical properties in AZ31B magnesium (Mg) alloy. A comparative analysis was conducted between ultrasonic vibration-assisted LBW and conventional LBW. The results established that the effective elimination of weld porosity, an outcome attributed to the combined effects of cavitation and acoustic streaming, resulted in a weld characterized by a visually seamless and structurally robust appearance. Furthermore, the incorporation of ultrasonic vibration assistance in the welding process yielded a finer microstructure as compared to the conventional LBW. Moreover, the lamellar structures of β-Mg17Al12 were transformed into particles and evenly distributed throughout the α-Mg matrix. In addition, the incorporation of 50% ultrasonic vibration assistance yielded notable improvements in tensile strength (259.6 MPa) and elongation (11.1%). These values represented enhancements of 4.8% and 35.4% as compared to joints fabricated by using conventional LBW.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.