Abstract
Commercially pure titanium (Ti) is widely used in bio-implants due to its high corrosion resistance. However, Ti exhibits marginally low mechanical and tribological properties, which limit its applications in some orthopedic implants. In this work, the Ti samples were subjected to ultrasonic surface mechanical attrition treatment (SMAT) for various durations to improve their surface properties such as hardness, strength and surface energy. SMAT-induced grain refinement was analyzed using optical, scanning electron and atomic force microscopy techniques. A Vickers hardness test was performed to determine the through-thickness hardness. Mechanical testing was carried out to measure the yield strength, ultimate tensile strength and ductility of the specimens. Corrosion tests were performed on a Gamry Potentiostat. The surface energy of SMAT-modified samples was calculated using the Owens–Wendt method. It was observed that SMAT reduced the average grain size from 50 μm to as low as 100 nm. The grain refinement and the corresponding grain boundary density led to a significant improvement in mechanical properties and biocompatibility in terms of increased hardness, yield and tensile strengths, surface energy, corrosion rate and hydrophilicity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have