Abstract
The dynamic recrystallization of Mg–Al–Zn–Nd alloy during moderate strain rate rolling was studied using electron backscatter diffraction (EBSD) and an energy dispersive spectrometer (EDS). The results showed three kinds of twinnings produced in the alloy in the strain rate range of 4.2 s−1∼7.3 s−1, including extension twinning, contraction twinning, and double twinning. The extension twinnings decreased gradually with the increase of strain rate. The dynamic recrystallization mechanisms during hot rolling under moderate strain rate conditions mainly include grain boundary nucleation, twinning nucleation, and secondary particle assistant nucleation. The dynamic recrystallization mechanism induced by twinning is mainly double twinnings. In addition, the strain value near the Al–Nd phase and grain boundary is higher than in grain. The Al–Nd particles in Mg–Al–Zn–Nd alloy play an auxiliary nucleation effect on dynamic recrystallization during hot rolling deformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
