Effect of trace residual ionic impurities on the response of chemiresistor sensors with dithiol-linked monolayer-protected gold (nano)clusters as sensing interfaces

Abstract

Column liquid–solid chromatography was used to remove residual impurities of isolated n-octanethiol (C 8H 17SH) monolayer-protected gold nano-clusters (MPCs) which were synthesized by a Brust two-phase method. Three-dimensional (3D) cross-linked MPC films were prepared directly on interdigitated electrodes to form chemiresistor sensors through the exchange reactions of the chromatographically purified MPCs with 1,6-hexanedithiol (HDT) or 1,4-benzenedimethanethiol (BDT). Ionic current induced by trace residual ionic impurities in MPCs was qualitatively detected by comparing the resistance responses of the sensors interfaced with the chromatographically purified and unpurified MPC films by employing volatile organic compounds (VOCs) and water vapor as probes, respectively. The existence of the ionic current significantly decreases the sensor sensitivities to VOCs. As for water vapor with high permittivity, the ionic current totally distorted the resistance responses from positive to negative with increasing humidity. Capacitance was also measured to characterize the permittivity change. The effect of ionic current on capacitance was not obvious. The humidity effects on the sensor responses to VOCs were also investigated. Fewer effects were observed on the higher hydrophobic compounds. A ternary sensor array was constructed with C 8Au MPCs, HDT and BDT cross-linked MPC films as sensing interfaces. The response pattern showed that the sensor array could discriminate VOCs with different functional groups. The as-prepared sensor showed the same sensitivities as the acoustic wave sensors.