Effect of tooth-related factors on the shear bond strengths obtained with CO2 laser conditioning of enamel.

Abstract

Carbon dioxide (CO2) lasers are capable of producing surface irregularities in human enamel which resemble those resulting from etching of enamel with orthophosphoric acid. This report presents the results of a laboratory study which examined the effect of selected tooth-related variables on shear bond strength between a current generation bonding agent (Scotchbond MultiPurpose) and acid-etched or laser-conditioned human enamel. There were no significant differences in shear bond strength between human maxillary central incisor teeth, first premolars, and third molars in either the acid etch or laser-conditioned groups. Polishing of enamel to give a flat surface increased the shear bond strength obtained with acid etching, but did not alter significantly bond strengths achieved with laser conditioning. There was a tendency for a higher bond strength with acid etching, but not with laser conditioning, in porcine molar enamel compared with human molar and bovine incisor enamel. In terms of the mode of operation of the laser, the repetitively pulsed mode resulted in a two-fold improvement in shear bond strength compared with the single pulse mode. These results indicate that shear bond strengths in the order of 10 MPa can be obtained reliably on human teeth using laser conditioning with pulsed modes in the absence of any other preparation of the natural enamel surface.