Abstract
The effect of the tool nose profile deviations in cutting tool inserts on the surface roughness of the work piece produced based on the actual tool nose profile geometry is studied. The nose profile was detected from the tool nose image captured using the 3-D metrology system. A edge detection approach combining moment invariance operator with Sobel 2-D filter operator is proposed. A work piece surface profile is then generated by considering tool nose profile deviation, feed rate, nose radius and wedge angle to study the effect of the work piece geometry deviation on the roughness values. Based on the experimental results, the maximum differences from ideal and experimental results are 19.8% for R t, 19.9% for R a and 16.1% for R q respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
