Abstract
Titanium has been added in the Al coatings on sintered NdFeB magnets by ion-beam-assisted magnetron sputtering to improve the mechanical properties of coatings without corrosion resistance deterioration. The effect of Ti addition on structure, mechanical and electrochemical properties of Al coatings has been investigated, complemented by x-ray diffraction and transmission electron microscopy. The results show that the ion-beam-assisted magnetron co-sputtering of Al and Ti obtains a single-phase polycrystalline structure of Al–Ti solid solution. With the increasing Ti content, the coating structure becomes denser and the grain size is reduced. Both the mechanical and wear properties of the coatings are improved with the addition of Ti where the hardness of the Al–Ti coating increases with the increasing amount of Ti. Polarization and EIS testing results show that the titanium-doped coatings have an enhanced corrosion resistance by comparison with pure Al coatings when Ti content is lower than 4.3 at.%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
