Abstract
Microarc oxidation (MAO) layers were prepared using 8g/L Na2SiO3 + 6g/L (NaPO3)6 + 4g/L Na2WO4 electrolyte with the addition of 2g/L Ti3SiC2/Ti3AlC2 particles under constant-current mode. The roughness, porosity, composition, surface/cross-sectional morphology, and frictional behavior of the prepared MAO layers were characterized by 3D real-color electron microscopy, scanning electron microscopy, X-ray energy spectrometry, X-ray diffractometry, and with a tribo-tester. The results showed that the addition of Ti3SiC2 and Ti3AlC2 to the electrolyte reduced the porosity of the prepared layers by 9% compared with that of the MAO layer without added particles. The addition of Ti3SiC2/Ti3AlC2 also reduced the friction coefficient and wear rate of the prepared layers by 35% compared with that of the MAO layer without added particles. It was found that the addition of Ti3AlC2 particles to the electrolyte resulted in the lowest porosity and the lowest wear volume.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
