Abstract
Hot torsion of a C (0.22 wt%)-Mn steel was used to investigate the influence of thermomechanical arameters on the strain induced dynamic transformation (SIDT) of ferrite. The pecimens were strained as a function of strain rate (0.05/sec - 5/sec) and strain (- 5.0) at right bove Ar3 temperature. The critical strain to initiate dynamically transformed ferrite nuclei during deformation increased as increasing the strain rate. On the other hand the completion of SIDT was hifted to larger strain by decreasing strain rate. This is due to the fact that the dynamic ransformation of ferrite was processed in the interior of austenite grain as well as at grain boundary y large stored energy and many nucleation sites for high strain rate. The dynamic transformed micro-structure of ferrite was developed to higher angle and the grain size could be refined to ~3 ㎛ at strain of 3.0 and 5/sec.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
