Abstract
Background/purposeIn orthodontic applications, NiTi wires are under continuous bending stress and exposed to fluctuations in temperature over long durations. The sensitivity of NiTi to temperature can have a considerable influence on its mechanical properties. This study investigated the effects of deflected NiTi wire, presented in stress-induced (detwinned) martensite microstructure, combined with thermal cycle on the microstructure and mechanical properties.Materials and methodsWe tested four types of as-received orthodontic NiTi: (1) Nitinol Classic (3 M Unitek), (2) Sentalloy (Tomy), (3) 27 °C CuNiTi (Ormco) and (4) 40 °C CuNiTi (Ormco). Each group of specimens was subjected to three different testing conditions: (1) temperature fluctuations (5000 cycles) between 5 and 55 °C, (2) continuous three-point bending force and (3) combination of thermal cycling and bending stress.ResultsThe specimens that underwent thermocycling as well as loading exhibited a substantial narrowing in stress hysteresis, which may be attributed to crystallinity lower than that of as-received NiTi wires. Reduced crystallinity can manifest in a number of imperfections, such as dislocations and internal stress, as well as a less-organized structure. Micro X-ray diffraction (XRD) analysis revealed the existence of martensite phase in Sentalloy wires subject to thermal and stress conditions. Under loading conditions, stress-induced martensite of NiTi wires exposed to temperature fluctuations of 5–55 °C also induced cyclic changes in bending stress. In a simulated intra-oral environment, the stability of austenite↔martensite transformation decreased.ConclusionThis study determined that bending stress in conjunction with repeated temperature fluctuations can greatly affect the microstructure and mechanical properties of NiTi wires.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have