Abstract
Based on molecular dynamics, a water and cellulose model was constructed to provide more theoretical support for the behavior characteristics of cellulose properties in thermo-hydro-mechanical treatment. In this paper, dynamic simulations were carried out under the NPT ensemble at 4, 5.5, 8, and 12 MPa, respectively. Moreover, we analyze the effects on the mechanical properties of wood cellulose in terms of the hydrogen bond numbers, small molecule diffusion coefficients, end-to-end distances, and mechanical parameters of the water–cellulose model. The results indicate that the densification of the water–cellulose model gradually increases with increasing pressure. The effect of pressures on mechanical properties is mainly due to the formation of massive hydrogen bonds within the cellulose chain and between water and cellulose. This is reflected in the fact that water molecules are more difficult to diffuse in the cellulose, which therefore weakens the negative effect of large amounts of water on the cellulose. The increase in end-to-end distance represents the stiffness of the cellulose chains being strengthened. The mechanical parameters indicate an increase in wood stiffness to resist deformation better, while reducing tensile properties at the same time. The dynamic simulation results in this paper can well correspond to macroscopic experiments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.