Effect of thermal treatment on the tensile and in‐plane shear behavior of carbon fiber‐reinforced poly(phenylene sulfide) composite specimens

Abstract

AbstractThe effect of PPS matrix evolution occurring during thermal treatment of carbon fiber‐reinforced PPS plies prior to their consolidation to laminates on the mechanical behavior of the composite material has been investigated. The thermal treatments were performed at temperatures and times, which are relevant for processing PPS composites. All thermal treatments were carried out in an oven in air to facilitate the presence of oxygen, while the subsequent consolidation was performed in an autoclave. The tensile and in‐plane shear behavior of both, thermal‐treated and untreated materials, was investigated. Differential scanning calorimetry and microscopy analyses were made to evaluate the effect of the performed thermal treatments on degree of crystallinity and porosity of the laminates. The mechanical tests carried out have shown an appreciable degradation of the mechanical properties investigated. The observed degradation increases with increasing thermal treatment temperature and time when thermal treatments were carried out on each single composite ply prior to the consolidation. On the other hand, when, prior to the consolidation, the whole set of plies was subjected to thermal treatment, improved mechanical properties were observed. The results were discussed under the viewpoint of PPS matrix evolution during processing of the composite plies in the presence of oxygen. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008