Effect of the thermal treatment on microstructure and physical properties of low-density and high transparency silica aerogels via acetonitrile supercritical drying

Abstract

In this paper, we reported the experimental results about the effect of the thermal treatment on microstructure and physical properties of low-density and high transparent silica aerogels. From our results, with tetramethyl orthosilicate as precursor and via acetonitrile supercritical drying process, silica aerogel monolith was obtained possessing the properties as low-density (0.018 g/cm3), high surface area (923 m2/g), high optical transparency (87.9 %, 800 nm). It should be noted that high transparency of silica aerogel can be maintained up to 600 °C (91.5 %, 800 nm). The mechanical properties of silica aerogel decreased with increasing heat treated temperature to 600 °C, and silica aerogels still maintained crack-free monoliths completely and possessed high homogeneous density even after 600 °C thermal treatment. Furthermore, thermal conductivity of the monoliths at desired temperatures was analyzed by the transient plane heat source method. When the temperature flowed from 25 to 600 °C, thermal conductivity coefficients of silica aerogels changed from 0.021 to 0.065 W (m K)−1, revealed an excellent heat insulation effect in high-temperature area. Currently, the specific process developed for low-density aerogels affected by thermal treatment has not been reported in previous literature.