Abstract
In this paper, comparative investigations of the effects of CNTs and γ-Al2O3 on the physicochemical properties and catalytic performances of Co based nano-catalyst during FTS have been presented. Catalysts were prepared via a wet impregnation method and characterized by various analytical techniques such as transmission electron microscopy (TEM), temperature programmed reduction (H2-TPR), carbon dioxide temperature programmed desorption (CO2-TPD) and X-ray photoelectron spectroscopy (XPS). Fischer-Tropsch reaction (FTS) was carried out in a fixed-bed microreactor (220°C and 1atm and with H2/CO=2v/v, SV of 12L/gh). Various characterization techniques revealed that Co nanocatalysts supported on CNTs and Al2O3 were different in physicochemical properties. There was a stronger interaction between Co and Al2O3 support compared to that of CNTs support. CNTs support increased the reducibility, dispersion, active metal surface area and decreased Co particle size. A significant increase in% CO conversion and FTS reaction rate was also observed over CNTs support compared to that of Co/Al2O3. Co/CNTs resulted in higher C5+ hydrocarbons selectivity compared to that of Co/Al2O3 catalyst.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
