Abstract
The present investigation is undertaken to study the performance of an existing stage of an industrial centrifugal compressor with a vaneless diffuser and is aimed at improving the efficiency of the compressor stage through the use of a low-solidity (LSD) vaned diffuser. The experiments were conducted at a tip Mach number of 0.35. The LSD vane is formed from a standard aerofoil profile with marginal modification in the trailing edge region. The study was conducted at a solidity ratio of 0.81, which is considered as the optimum for the chosen stage. The overall stage performance for different diffuser vane setting angles was evaluated in terms of flow coefficient, head coefficient, polytropic efficiency and static pressure recovery coefficient. The performance parameters are normalized with respect to those of the vaneless diffuser at design flow. Improvement in performance as well as static pressure recovery was observed with LSD vanes as compared with a vaneless diffuser configuration. Variation in blade loading was studied from measurements of static pressure on the pressure and suction surfaces of LSD vanes at different vane setting angles. It was observed that the vane setting angle has a significant effect on stage performance and also on the blade loading.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
