Abstract
The study addresses the effect of the reduction conditions of palladium polynuclear hydroxo complexes (PHC) supported on the Sibunit carbon material on the dispersion of the metal particles and the activity of 0.5%Pd/Sibunit catalysts in the selective hydrogenation of sodium 2,4,6-trinitrobenzoate to 1,3,5-triaminobenzene in an aqueous solution (temperature of 323 or 343 K, pressure of 0.5 MPa). The palladium PHC were reduced using the most common methods pertaining to catalyst preparation: liquid-phase reduction with sodium formate and reduction in a hydrogen flow at elevated temperature. It was found that high-temperature reduction in the gas phase gives rise to Pd particles with a markedly lower dispersion compared with the sample obtained under mild liquid-phase reduction conditions. The catalytic activity of the sample containing large Pd particles proved to be higher than the activity of the catalyst obtained by reduction with sodium formate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
