Abstract
This paper addresses heat distribution issues in fused filament fabrication (FFF) process. Three-dimensional (3D) numerical simulations and experimental investigations are performed during additive manufacturing of parts by FFF process. The transient numerical simulations of the filament temperature field are based on the finite difference method. Experimental measurements of the temperature field are carried out using infrared thermography. The proposed model mainly highlights the contribution of heat exchange from the nozzle to the fabricated part and from filament to filament. Optimum adhesion of filaments deposited by FFF requires control of the thermal history. The nozzle radiation is taken into account as a source term in the heat balance equation. The temperature fields of the printed parts computed by numerical simulations are in very good agreement with the temperature fields measured by infrared thermograph. The 3D numerical model provides information on how the nozzle affects the temperature field of the printed part. This source term must be taken into account for the optimization of the FFF process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
