Abstract
In this work, the precipitation and the morphology of secondary phases after severe plastic deformation (SPD) processing followed by an isothermal treatment was investigated. High-pressure torsion (HPT) was the SPD process carried out on superduplex 2507 (UNS S32750) stainless steel material under P = 6 GPa at room temperature. At this high strain levels (ε up to 170) samples have shown grain size decrease and strained microstructure with high dislocation density and nanostructure features. After a short isothermal treatment at 830 °C, the sigma phase and chromium nitrides were revealed as the main secondary phases identified by scanning and transmission electron microscopy and element analysis by energy dispersive spectroscopy. Scanning precession electron diffraction and automated crystal orientation mapping have been carried out in order to confirm the precipitation of the secondary phases. In fact, the results provide evidence that the precipitation of chromium nitrides seems to be the preferred nucleation site for sigma phase at higher deformation strain, in addition to the intergranular precipitation of sigma. Both the sigma phases nucleated integranularly and besides chromium nitrides are randomly orientated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
