Effect of the fabrication process on the microstructural evolution of carbon fibers and flexural property on C/SiC composites by the NITE method

Abstract

Nano-infiltration and transient eutectic phase (NITE) SiC matrix composites are designed for application in aerospace propulsion systems, particularly in fasteners and thrusters. A variety of carbon fibers with different properties have been selected as reinforcements for SiC matrix composites. Carbon fibers are known to be stable at high temperatures; however, the effects of high applied pressure at high temperatures on the fiber microstructure evolution and mechanical properties are not well-known. As a scoping study for fabricating NITE C/SiC composites, the behaviors of various carbon fibers in SiC composites. Pitch-based fibers, namely, GRANOX XN-05 and YS-90A, and a polyacrylonitrile-based fiber, namely, TORAYCA T-300B, were selected for matrix reinforcement. The 3-point bending test results indicated pseudo-ductile behaviors in the cases of YS-90A and T-300B fiber reinforcements. Fracture resistance evaluation based on the single-notch bending test indicated that the YS-90A fiber reinforced composite afforded the highest fracture resistance among the three C/SiC composites. The microstructure evolution on YS-90A and T-300B fibers was limited to near the fiber surface. Therefore, YS-90A and T-300B carbon fibers are potential candidates for reinforcement in NITE C/SiC composites.