Abstract
Slag foams have been investigated with smaller bubbles than those used in the previous studies.[5,6,7] The bubbles were generated by argon gas injection with the nozzle of multiple small orifices and by the slag/metal interfacial reaction of FeO in the slag with carbon in the liquid iron. The foam stability in terms of the foam index for a bath-smelting type of slag (CaO-SiO2-Al2O3-FeO) was determined for different bubble sizes. The average diameter of bubbles in the foam was measured by an X-ray video technique. When the foam was generated by the slag/metal interfacial reaction at 1450 °C, it was found that the average bubble diameter varied from less than 1 to more than 5 mm as a function of the sulfur activity in the carbon-saturated liquid iron. The foam index was found to be inversely proportional to the average bubble diameter. A general correlation is obtained by dimensional analysis in order to predict the foam index from the physical properties of the liquid slag and the average size of the gas bubbles in the foam.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
