Abstract
AbstractWhen partly soluble chemical curatives are mixed with raw rubber, they migrate to the rubber surface, which can be detrimental to the rubber properties. Two rubber compounds with different amounts of curatives were prepared by mixing natural rubber with a high loading of precipitated amorphous white silica nanofiller. The silica surfaces were pretreated with bis(3‐triethoxysilylpropyl)‐tetrasulfide coupling agent to chemically adhere silica to the rubber. The chemical bonding between the filler and rubber was optimized via the tetrasulfane groups of bis(3‐triethoxysilylpropyl)‐tetrasulfide by adding accelerator and activator. The rubber compounds were cured and stored at ambient temperature for up to 65 days. One compound showed extensive blooming as a function of storage time. The cyclic fatigue life of the rubber vulcanizates was subsequently measured at a constant strain amplitude and test frequency at ambient temperature. The blooming of the chemical curatives reduced the cyclic fatigue life of the rubber vulcanizate by more than 100%. The migrated chemical curatives produced a thin layer approximately 15 μm in size beneath the rubber surface. When the rubber was stressed repeatedly in the fatigue test, cracks initiated in this layer and subsequently grew, causing the fatigue life of the vulcanizate to decrease. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
