Effect of test related factors on the degradation of cement-based materials on acetic acid exposure

Abstract

Abstract Exposure of concrete to various acids can hardly be overstated due to the widespread use of concrete in the construction industry. The effect of selected factors on the degradation of ordinary Portland cement (OPC 53 grade) paste and mortar exposed to acetic acid is investigated in this paper. Various test parameters such as mass loss, loss in cross-sectional area, relative dynamic elastic modulus (RDEM), loss in flexural and compressive strength are used to assess the selected factors and the results obtained are analysed to determine the most favourable test conditions for degradation, that can be adopted for developing an accelerated test method. The factors used for the investigation are replenishment of acid solution, concentration of acid solution, ratio of surface area of specimen to volume of liquid acid solution (S/L), shape of the specimen and nature of the specimen. This paper also investigates the interrelationships among test parameters and adopts interpretation of acid consumption to assess the aggressiveness of the acid solution. It was found that renewing conditions and high concentrations of acid solution (0.5 M) indicate rapid degradation. The aggressiveness of 0.125 M acetic acid solutions in renewing conditions is about 5 times that of non-renewing conditions respectively. The rate of degradation is inversely related to S/L ratio. Cylindrical specimens have a marginal increase in degradation than prismatic specimens. It is preferable to evaluate acid attack on mortar specimens rather than paste specimens due to higher loss in cross-sectional area and relative dynamic elastic modulus (RDEM).