Abstract

This paper presents an experimental investigation on the effect of temperature on resistivity of Carbon Fiber Reinforced Polymer (CFRP) materials. A series of tests were conducted on three types of CFRP materials, namely pure CFRP material, CFRP with carbon powder (4% in weight) and CFRP with nano-silica (4% in weight). Test results showed that adding carbon powder into the epoxy resin decreases the initial electric resistance R0 and initial volume resistivity ρ0 while adding nano-silica increases R0 and ρ0 compared to pure CFRP material. Preheating cycle test results showed that the volume resistivity of all three types of specimens linearly increases with increasing temperature. CFRP with added nano-silica exhibits higher temperature sensitivity than CFRP with added carbon powder compared to the lowest temperature sensitivity for pure CFRP material. In addition, temperature cycle test results showed that CFRP specimens have approximately stable values of volume resistivity. Both CFRP specimens with added carbon powder or nano-silica exhibit a recognizable trend of first decrease and then increase in volume resistivity with increasing temperature both during heating and cooling cycles. CFRP with added carbon powder mainly shows Negative Temperature Coefficient (NTC) effect in the temperature range of −40 to 40°C and Positive Temperature Coefficient (PTC) effect from 40 to 80°C. CFRP with added nano-silica mainly exhibits PTC effect in the temperature domain of −15 to 80°C and NTC effect from −40 to −15°C. A mathematical-physical model with respect to the thermal effect was presented based on the Eshelby-Mori-Tanaka (EMT) approach and mesomechanics method. The results obtained with the model agree well with the test results considering the temperature domain of PTC effect, which indicates that the proposed model is effective in characterizing the variation of fractional change in resistance (ΔR/R0) at varying temperature.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.