Effect of temperature on mechanical properties of ultra‐high performance concrete

Abstract

SummaryHigh temperature mechanical property data are needed for evaluating fire resistance of structural members. Being a relatively new construction material, there is a lack of temperature‐dependent mechanical property data on ultra‐high performance concrete (UHPC). To address this knowledge gap, this paper presents results from an experimental study on the effect of temperature on mechanical properties of UHPC. Specimens made of two UHPC mixes: one with only steel fibers (UHPC‐S) and the other with hybrid fibers, that is, both steel and polypropylene (UHPC‐H), were tested under different heating conditions in 20 to 750°C temperature range. Compressive strength, tensile strength, stress‐strain response, and elastic modulus of UHPC were evaluated at various temperatures. Results generated from these property tests on UHPC were compared with property relations specified in design codes for conventional normal strength concrete (NSC) and high strength concrete (HSC). The comparisons show that UHPC experiences faster degradation in compressive strength and elastic modulus as compared to conventional concrete. However, UHPC exhibits slower degradation in tensile strength and ductility at elevated temperatures due to the presence of steel fibers. Data generated from these property tests were utilized to propose relations for expressing the mechanical properties of UHPC as a function of temperature and these relations can be used as input to numerical models for evaluating fire resistance of structures made of UHPC.