Effect of temperature gradient within a solid particle on the rotation and oscillation modes in solid-dispersed two-phase flows

Abstract

Liquid–solid two-phase flow with heat transfer is simulated, and the effect of temperature gradient within a solid particle on the particle behaviour and heat transfer is studied. The interaction between fluid and particles is considered with our original immersed solid approach on a rectangular grid system. The local heat flux at the fluid–solid interface is described with an anisotropic heat conductivity matrix, and the governing equation of temperature is time-updated with an implicit treatment for the diffusion term. The method is applied to a 2-D natural convection flow of a relatively low Rayleigh number including multiple particles. Heat transfer and particle behaviours are studied for different solid heat conductivities (ratio to the fluid conductivity ranging between 10−3 and 103) and solid volume fractions. Under a condition of relatively low heat conductivity ratio, the particles show a simple circulating flow. By increasing the heat conductivity ratio, a transition of the particulate flow is observed to oscillation mode around the domain centre due to the buoyancy force as a restitution force. The oscillation period is found to vary with the heat conductivity ratio, and it is related to the time scales for the heat transfer via fluid and solid.