Abstract
a new combination fluid seal with the cone/pores is given, and the 3D fluid/solid coupling theory model is constructed, considering the interaction between the liquid pressure field and the stress deformation of the seal rings, led to seal clearance unceasingly change. Through the corresponding numerical calculation, film pressure distribution and end face deformation situation are obtained between the seal end faces, the influence rule of taper on sealing performance under the high and low pressure conditions is analyzed. The results show that the dynamic pressure effect caused by rhomboid pores can produce circumferential and radial wavy deformation of the seal end faces, while the static pressure effect also changes with the taper change of the end faces. For the low pressure and medium speed equipment, the conical end face which the taper is 0-2.4 should be chosen priority. For higher pressure and rotational speed device, the convergence end face seal which the taper is 0-2.4 should first be chosen.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.