Abstract

The need to shield the surroundings from fire or combustion generated pollutants has led to substantial demand for perk up burner design with better performance. In this study, the geometry of a liquid fuel burner has been modified by introduction of straight edge blade swirler and thereafter, measurement using chromium-zinc thermocouple of radial and axial temperature distributions. The straight blade swirl generator consists of 6 number of blades at angles 20°, 30°, 40°, 50° and 60°, respectively was fired by conventional diesel in an experimental model liquid fuel swirl burner. The highest axial temperature of combustion without and with swirler was 930℃ and 1121℃, respectively, while the highest radial temperature without and with swirler was 942℃ and 1130℃, respectively. The achieved 21% performance improvement suggests that burners with swirl have varied higher flame temperature and combustion intensity than their counterpart without swirl. The outcome of this study has revealed that higher agitation of the swirl significantly affected the thermal profile and this subsequently led to high combustion intensity. The changes can be attributed to turbulence being provoked at selected angles of swirl blade. The effect is enhanced as the angle of swirl blade increases, howbeit, until a threshold is reached.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call