Abstract
In this relatively unique study, the impact of adding nanoparticles (NPs) on the fatigue properties of antisymmetric glass fiber reinforced polymer (GFRP) laminate has been investigated. Antisymmetric GFRP laminates (+45/02/902/02/-45) were prepared and reinforced once with 0.1 wt% of single-walled carbon nanotubes (SWCNTs) and then with 0.1 wt% of Graphene nanoplatelets (GNPs). The NPs reinforced GFRP laminates are termed here GFNRP nanocomposites. Ultrasonication method was used to disperse the NPs using carefully chosen process parameters. Fatigue tests were analyzed based on S-N curves, stiffness degradation and hysteresis loops. The results showed that the use of 0.1 wt% of SWCNTs led to an increase in the fatigue strength coefficient (FSC) and the fatigue strength exponent (FSE) of GFNRP nanocomposite specimens by 51% and 24%, respectively, while the use of similar wt.% of GNPs enhanced the FSC and FSE by 33% and 25%, respectively. Consequently, fatigue life of GFNRP nanocomposites are surprisingly enhanced by about three and twelve times when GNPs and SWCNTs are used, respectively. The findings would give designers much more confidence in using antisymmetric composite laminates in specific elastic tailoring structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
