Abstract
AbstractBACKGROUND: The performance of two biotrickling filters (BTFs) was evaluated for styrene removal from gas streams at the start‐up period and at a pseudo‐steady‐state under various operating conditions.RESULTS: The BTFs exceeded 99% removal efficiency within 19 days when the average inlet styrene concentration was 250 mg m−3 and gas empty bed retention time (EBCT) was 30.0 s. The effect of a surfactant, Triton X‐100, on styrene removal was examined by comparative experiments in which one biofilter was fed with nutrient solution with the surfactant while the other without the surfactant, and the average organic loading rate of styrene was set at 65.3, 100.9 and 201.7 g styrene m−3 h−1, respectively. Results showed that the corresponding average removal efficiency was 87%, 70% and 50% for the BTF without surfactant, while the average removal efficiency for the BTF with surfactant was 96%, 92% and 82%. Excessive biomass accumulation was observed in the medium when the styrene loading rate was high. However, the biomass density within the BTF medium when the surfactant was added remained stable during the whole period of the operation.CONCLUSION: These results demonstrated that the use of Triton X‐100 can improve the degradation of styrene and control the excessive biomass accumulation. Copyright © 2012 Society of Chemical Industry
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Chemical Technology & Biotechnology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
