Effect of surface wave inversion non-uniqueness on 1D seismic ground response analysis

Abstract

Surface wave methods are increasingly being used for geotechnical site characterization. The methodology is based on the dispersive characteristic of Rayleigh waves in vertically heterogeneous medium. Experimental dispersion curve is inverted to obtain one-dimensional shear-wave velocity profile by inverse problem solution. Uncertainty associated with this surface wave inversion has drawn much attention. Inverse problem solution can provide different equivalent shear-wave velocity profiles, which may lead to different seismic site response analysis. In this study, a neighborhood algorithm has been used for inversion of dispersion curve to get a set of equivalent shear-wave velocity profiles. These equivalent velocity profiles are then used for 1D ground response analysis for different input motion record of the same earthquake at different epicentral distances. Results show significant variation in amplification spectrum in terms of maximum amplification as well as peak frequency. The extent of this uncertainty largely depends on the characteristics of the ground motion records at different epicentral distances. A linear variation is observed between mean coefficients of variation of amplification spectrum and epicentral distance of ground motion records. A gradual increase in mean value of peak frequency and peak amplification with the epicentral distance is also observed.