Effect of Surface Treatments on the Color Change and Shear Bond Strength of Porcelain Laminate Veneer

Abstract

Effect of Surface Treatments on the Color Change and Shear Bond Strength of Porcelain Laminate Veneer Aim of the study: the purpose of this Invitro study to evaluate the effect of surface treatments on the color change and shear bond strength of lithium disilicate glass ceramic veneers. Materials & Methods: Twenty square samples with dimensions (8x8x2) and another twenty samples with smaller dimensions (4x4x2) were cut from five IPS e-max CAD blocks of shade A3. The discs were divided into two groups: 1) Half of the small and large blocks were subjected to hydrofluoric acid (HF); 2) the other half was subjected to Co2 laser irradiation. The conditioned samples were subdivided according to the bonding agent: A) Silane application for 60 seconds; B) Single bond universal light cured for 10 seconds. Each small sample was cemented on the top of a large sample using Rely-x veneer cement with translucent shade. The color change was measured using spectrophotometer. The shear bond strength was tested using a universal testing machine. Results: HF resulted in higher bond shear bond strength and ΔE than Co2 laser. Single bond universal resulted in higher shear bond strength values than silane. Conclusion: HF followed by either single bond universal or silane could be the best surface treatment for e-max CAD ceramic. However, Co2 laser could be a promising alternative surface treatment.