Effect of surface treatment on the bioactivity of nickel–titanium

Abstract

In this paper, the bioactive properties of Ni–Ti alloy after different surface treatments were evaluated in different media (Hanks’ balanced salt solution, Dulbecco’s modified Eagle’s medium and osteogenic). Evaluation was performed on the basis of X-ray photoelectron spectroscopy and atomic force microscopy studies after immersing samples for up to 24 h in the relevant media. This allowed assessment of the kinetics of Ca 2+ and P 5+ precipitation and early interaction of the media with surfaces. In addition, the surface free energy was measured and the influence of heat treatment on phase transformation temperatures and rate of nickel and titanium ion release was investigated. The most favourable bioactive properties were observed for simply ground Ni–Ti samples when evaluated in HBSS, which showed similar properties to reference positive samples (BioactiveTi). On the other hand, samples heat-treated at 600 °C showed very low levels of precipitation of Ca and P. Most interestingly, evaluation in the media containing organic components (protein, vitamins, antibiotics and drugs) revealed that bioactivity for all the samples was at the same level (except for the reference negative) irrespective of the surface preparation method. It demonstrated that organic components interact with the surface rapidly, forming a thin protein layer, and this altered the surface properties of the samples, making them bioactive. No significant difference in kinetics of the Ca 2+ and P 5+ precipitation were observed. Nevertheless, further ion release and chemical composition evaluation revealed that alkali treatment and spark oxidation cannot be considered as a useful for biomedical application due to very high levels of Ni in the top layer (alkali-treated) and high rate of Ni release (spark-oxidized and alkali-treated).