Abstract
AbstractThe effect of surface treatment of pitch‐based carbon fiber on a new engineering thermoplastic resin, polyethernitrile, was investigated. Pitch‐based carbon fiber (CF) was treated in two separate oxidizing solutions. In the first method, a nitric acid solution was used as an oxidizing agent. In the second method, a hydrogen peroxide solution was used. Both methods demonstrated that each of these solutions was a satisfactory oxidizing agent for the pitch‐based CF. These treated fibers were combined with polyethernitrile polymer by the powder impregnation method, and unidirectional laminates were obtained. Improvements in both interlaminar shear strength and transverse flexural strength were achieved. The laminates fabricated from the treated CF maintained the same longitudinal flexural strength as laminates from the untreated control. In addition, scanning electron micrographs of composite fracture surfaces also showed excellent bonding of the treated fiber.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
