Abstract
Bio-composites made of polylactic acid (PLA) matrix reinforced with cellulose fibers (CF) were prepared using a twin-screw extruder and injection molding. The CFs were coated with epoxy-based surface treatment agents. Accelerated degradation tests were carried out on these PLA/CF composites at high temperatures (60 °C) or at constant temperature and constant humidity (60 °C/70% RH), and the higher-order structure changes and degradation characteristics of the molded products were evaluated. In the accelerated degradation test at 60 °C, the thermal and mechanical properties of PLA/CF composites showed no degradation, whereas at 60 °C and 70% RH, the melting point decreased ca. 25 °C and the storage modulus with increasing elapsed time decreased more than 50%. However, the thermal and mechanical properties of the PLA/CF composites treated with low-molecular-weight epoxy did not degrade, even at the high humidity of 70% RH. These results strongly suggest that the surface treatment agent not only improves interfacial adhesion between CF and PLA but also plays an important role in inhibiting degradation of the PLA matrix.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
