Abstract
Laser Powder Directed Energy Deposition (LP-DED) fabricated components exhibit poor surface finish, necessitating additional post-processing steps prior to their practical application. Enhancing the surface quality of additively manufactured IN718 specimens through conventional post-processing methods is particularly challenging, given the material’s poor machinability and the complexity of the fabricated components. The current study is centered on comprehending the impact of Laser Surface Remelting (LSR) on the surface properties of Laser Powder Directed Energy Deposited (LP-DED) IN718 material. To gain insights into how remelting influences surface characteristics, remelting was carried out using various sets of parameters. The remelted zone exhibited a refined grain structure, leading to increased hardness. Moreover, significant reductions in surface roughness and residual stress were observed in the remelted samples. Regression analysis indicated that laser power played a pivotal role, with positive impact on surface finish and depth of influence but a negative impact on residual stress and hardness. Therefore, considering all the comparison metrics, remelting using laser power of 150 W and a scan speed of 1140 mm min−1 were found to yield optimal surface conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
