Effect of Surface Reaction on the Distribution Characteristics of Temperature and OH Radicals in Microchannel Combustion

Abstract

Microchannel burners suffer from low combustion efficiency and poor stability in applications. In order to explore the effect of wall reaction on methane/air premixed combustion performances in the microchannel, the effects of wall activity, inlet velocity, pressure, and equivalence ratio on the temperature and radical distribution characteristics were studied by CFD computational simulations. It is found that as the reaction pressure increases, there are more free-radical collisions, causing the reaction temperature to rise. The OH radicals participate in the reaction at the active near wall so that the mass fraction of the OH radical on the active wall is lower than that on the inert wall. As the equivalence ratio increases from 0.6 to 1.2, the high-temperature regions increase but the maximum temperature decreases. The mass fraction of OH radical increases with the increase of the equivalence ratio, and the increase of OH radical near the inert wall is larger than that of the active wall. As the flow rate increases, the disturbance increases, and the combustion reaction becomes more intense, resulting in an increase in the temperature and the mass fraction of OH radicals. The mass fraction of H, O, OH, and CH3 radicals in the inert wall was slightly higher than that in the active wall, in which the peak mass fraction of CH3 radical appeared at the axial position closest to the entrance, while the other three radicals reached the peak at about the same axial position. This study provides a reference for combustion stability in microcombustors.