Effect of surface modification on starch/phospholipid wettability

Abstract

Abstract The objective of this work was to determine surface properties of biopolymer film as a function of temperature and/or after plasma treatment with the aim of further wettability tests and biocompatibility. The examined biopolymers were native starch and starch modified by solution of PC (phosphatidylcholine). Contact angles for polar water (and formamide) and nonpolar diiodomethane on the glass plates covered with starch film before and after gelatinization (25 °C, 37 °C and 60 °C) were measured for the base and plasma modified film. The surface free energy of solid (gel) was determined from the advancing and receding contact angles of these probe liquids, using the contact angle hysteresis model (CAH). The plasma treatment was immediately followed by a sharp decrease of contact angle and in the course of ageing the contact angle also decreased due to the reorientation of polar groups into the polymer surface layer. To depict better changes in hydrophilic/hydrophobic character of the starch surface before and after modification the work of water spreading, W S was calculated. A sharp decrease in negative values of W S takes place which indicates more hydrophilic character of starch surface after modification. Surface morphology and roughness were studied by optical profilometer and FTIR measurements which confirm the contact angle results. It was also proved that a combination of input treatment parameters led to improvement of biopolymer wettability and provided possibilities of starch application where uniform thin films are required.