Effect of structural evolution on mechanical properties of ZrO2 coated Ti–6Al–7Nb-biomedical application

Abstract

Zirconia (ZrO2) nanotube arrays were fabricated by anodizing pure zirconium (Zr) coated Ti–6Al–7Nb in fluoride/glycerol electrolyte at a constant potential of 60V for different times. Zr was deposited atop Ti–6Al–7Nb via a physical vapor deposition magnetron sputtering (PVDMS) technique. Structural investigations of coating were performed utilizing X-ray diffraction (XRD) analysis. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) were used to characterize the morphology and microstructure of coatings. Unannealed ZrO2 nanotube arrays were amorphous. Monoclinic and tetragonal ZrO2 appeared when the coated substrates were heat treated at 450°C and 650°C, while monoclinic ZrO2 was found at 850°C and 900°C. Mechanical properties, including nanohardness and modulus of elasticity, were evaluated at different annealing temperatures using a nanoindentation test. The nanoindentation results show that the nanohardness and modulus of elasticity for Ti–6AL–7Nb increased by annealing ZrO2 coated substrate at 450°C. The nanohardness and modulus of elasticity for coated substrate decreased with annealing temperatures of 650, 850, and 900°C. At an annealing temperature of 900°C, cracks in the ZrO2 thin film coating occurred. The highest nanohardness and elastic modulus values of 6.34 and 218GPa were achieved at an annealing temperature of 450°C.