Abstract

Effect of change in strain path during rolling and its role in the development of crystallographic texture after deformation and then after recrystallization has been studied for Ni-40wt%Co which is a medium stacking fault energy (SFE) material. Results indicate that textures developed after unidirectional rolling and multi-step cross-rolling are quite different which also leads to different texture evolution after recrystallization. Microstructure of both UDR and cross rolled sample shows band type of feature within the grain having lesser band density for cross rolled samples. After recrystallization unidirectionally rolled sample shows bimodal whereas cross rolled sample shows equiaxed grain size distribution. But all the samples show large fraction of annealing twins. It has been shown that in all cases formation of annealing twins have large influence on the texture transition after recrystallization.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.