Abstract
Poly(glycerol sebacate) (PGS) is an excellent scaffold material in tissue engineering due to good biocompatibility and tunable mechanical properties. The degradation properties of PGS have been primarily explored in static phosphate buffer solution or enzyme solution. It is vital to understand how the tensile stress affect the degradation rate. In this study, PGS was synthetized by melt polycondensation and its properties were characterized. Then an in vitro degradation device which could provide different constant tensile stresses was carefully designed and established, and the enzymatic degradation of PGS was tested under 0-150 kPa at 37°C. It was found that holes of PGS surface arranged almost parallel to each other and perpendicular to the direction of tensile stresses at 100 kPa and 150 kPa after 2-4 days degradation. After 8 days degradation, the ultimate tensile strength (UTS) of PGS at 150 kPa was 0.28 MPa and the elastic modulus was 1.11 MPa, while the UTS of PGS was 0.44 MPa and the elastic modulus was 1.63 MPa before degradation, both of them have significant differences. Hence, the tensile stress and degradation time were proportional to the appear time and size of holes, leading to the decrease of mass loss, UTS and elastic modulus. The relationship between stress and PGS degradation rates was quantitatively described through our degradation experiments, providing guidance for suitable PGS applications in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.