Abstract
The effect of the prior solution treatment temperature on the δ-ferrite transformation in 2205 duplex stainless welds after aging at 850 °C has been studied. Microstructural examination showed that the σ-phase and M 23C 6 chromium carbides precipitate at the δ/γ interfaces and within the δ-ferrite grains. Increasing the solution treatment temperature from 1050 to 1250 °C delays the σ-phase formation and favours the precipitation of intragranular secondary austenite γ 2. The simulation of the σ-phase precipitation kinetic in the base metal, HAZ and weld metal, indicates a good agreement between the experimental fitted data and the modified Johnson–Mehl–Avrami model. The results indicate a marked sensitivity of the σ-phase precipitation kinetic to the solution treatment temperature. A high precipitation rate corresponds to a fine grained structure with ferrite enriched in σ forming elements (Cr, Mo).
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
