Effect of solid blocking on lateral bracing requirements for cold-formed steel wall studs

Abstract

The effectiveness of horizontal bracing in increasing the strength of cold-formed steel (CFS) load-bearing walls has been widely acknowledged. However, while significant research has been conducted regarding the bracing requirements for CFS bearing walls, the effect of solid blocking, which prevents columns (studs) within the wall from rotating, has not been fully explored. In this study, we propose an analytical method to quantitatively assess the effect of solid blocking on bracing requirements for CFS load-bearing walls. This method is comprehensive as it can be applied to systems with different bracing patterns, load patterns, or non-identical columns (studs), and it accounts for the columns’ initial curvature and semi-rigid end connections. It has been verified that considering the solid blocking always decrease the bracing requirements because the existence of solid blocking increases the system’s stiffness and subsequently decreases the additional displacement as well as the brace force, as expected. An example consisting of 23 CFS studs is presented to illustrate how the effect of solid blocking on bracing requirements is influenced by the location and interval of solid blocking, the stiffness of column end connections, and the characteristics of tie bracing. The results indicate that the effect of solid blocking on bracing requirements increases when the location of solid blocking is closer to the anchor and the solid blocking interval is smaller. Moreover, a modification to the equation in AISI S100 is proposed to account for the effect of solid blocking on the strength requirement of tie bracing. Overall, this research contributes to a better understanding of the role of solid blocking in CFS load-bearing walls and provides insights for optimizing bracing design in practice.