Abstract

Purpose: The soil air diffusion coefficient (Ds) is particularly important for the study of soil gas diffusion movement, and there are still many uncertainties in the widely used methods; as such, a method was designed to in situ measure the soil gas diffusion coefficient. Methods: Four different soil media were selected and studied by means of a designed in situ measurement of soil gas diffusion coefficients, and these were compared and analyzed with the predictions of several commonly used prediction models. In addition, they were combined with gas transport models to validate the results of the empirical models that were obtained by the in situ measurements. Results: The results of the data indicate that increasing the volumetric soil moisture content decreases the soil gas diffusion coefficient, with changes in the soil gas diffusion coefficient for the small-grained quartz sand medium being similar to those predicted by the Buckingham model. The soil gas diffusion coefficients for the large-grained quartz sand were similar to the Millington and Quirk model predictions at low humidity; for increased humidity, it was instead similar to the Buckingham model predictions. The soil gas diffusion coefficients of the two active media were closer to those of the SWLR model with high Cm. In addition, the R2 of the measured data was verified, by empirical modeling, to be greater than 0.54, and inversion experiments were conducted to verify that the results were consistent with those of the SWLR model. Conclusion: When measuring relative diffusion coefficients in the field, we recommend the in situ measurement method, which is more reflective of the actual situation in natural environments and provides more accurate data support for soil carbon flux studies.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call