Abstract
Jointing YBa2Cu3O7-z (YBCO) superconducting coated-conductor (CC) tapes is becoming increasingly significant for magnet applications because of the limited length of single tapes. In this work, YBCO CC tapes stabilized by silver were connected by low-temperature sintering of nano-silver paste. The effect of sintering time and lapped length on the electrical properties of YBCO joints were systematically investigated. And the correlation between microstructure and bonding force of the joints with extending the sintering time was established. It is found that joints sintered within 1∼5 min exhibit relatively lower resistance, while the maximum axial tensile strength at room temperature (RT) was improved with increasing sintering time. Considering the electromechanical properties, ten min is selected as the optimal sintering time for nano-silver paste. The joint by this efficient technology possesses closely connected interface, similar critical current and axial tensile strength (RT) to the single CC tape. The joint resistivity is as low as ∼12.5 nΩ·cm2, which is much less than the traditional soldering joint.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
